AC Infinity UIS Device Adaptor – Expand Your Controller Compatibility

Make your AC Infinity UIS control system even more versatile with the UIS Device Adaptor range. These compact adaptors are designed to allow selected third-party equipment to communicate with a compatible AC Infinity controller, giving you greater freedom when building an automated grow room.

If you already have lighting or environmental equipment that isn’t manufactured by AC Infinity, you don’t necessarily need to replace it to benefit from UIS control. Providing the equipment uses a supported control signal, the correct adaptor can provide the connection needed to incorporate it into your existing setup.

This makes it possible to manage compatible third-party equipment alongside your other UIS devices from one central control system.

Please note: These adaptors are purchased to order, so please allow additional time for delivery.

Two Adaptor Types Available

Different equipment uses different methods of external control, which is why the UIS Device Adaptor is available in Type A and Type B versions.

Type A – 0-10V / PWM

The Type A adaptor is intended for compatible equipment that operates using a 0-10V or PWM control signal.

These control methods are commonly found on dimmable LED grow-light drivers and other compatible equipment. If you’re looking to integrate suitable third-party lighting into your UIS setup, this is typically the connection type you’ll need to check for.

Type B – Resistive Control

The Type B adaptor is designed for compatible equipment that uses a resistive control signal.

Because the two versions aren’t interchangeable for every piece of equipment, it’s important to confirm the control or dimming method used by your device before ordering.

Why Use a UIS Device Adaptor?

A UIS Device Adaptor gives you more freedom to build your grow-room control system around the equipment you already own.

Instead of limiting your automation to native UIS products, a compatible adaptor can allow supported third-party devices to become part of your wider AC Infinity control setup.

Key Benefits

• Integrate Compatible Third-Party Equipment – Add selected non-AC Infinity devices to your UIS system.
• Centralised Grow Room Control – Manage more of your compatible equipment through one controller.
• Useful for Compatible LED Drivers – Type A supports equipment using common 0-10V and PWM control methods.
• Two Connection Types Available – Choose between Type A and Type B depending on your equipment.
• RJ11/12 Connection – Provides a neat and straightforward connection into the UIS platform.
• Expand an Existing UIS Setup – Add compatible equipment without rebuilding your entire control system.

The UIS Device Adaptors are particularly useful for growers who already use an AC Infinity controller but have other brands of equipment they would also like to incorporate into their automated setup.

For example, you may already have a compatible dimmable LED fixture that uses a 0-10V or PWM control input. With the appropriate adaptor, it may be possible to bring that equipment under your AC Infinity control system rather than operating it completely separately.

They’re also useful when upgrading a grow room gradually, allowing you to retain compatible existing equipment while introducing UIS automation.

Specification	Details
Type A	Designed for compatible 0-10V / PWM signal equipment
Type B	Designed for compatible resistive-signal equipment
Connection	RJ11/12 to UIS
System	AC Infinity UIS
Application	Connecting supported third-party equipment to compatible UIS controllers

Important Compatibility Information

These adaptors do not make every third-party device UIS compatible.

The equipment must have a suitable external control or dimming input that matches the adaptor being used. Always check the specifications or instruction manual for your equipment before purchasing.

If you simply want your controller to switch a conventional mains-powered appliance on and off, the AC Infinity UIS Control Plug may be the more appropriate accessory.

Frequently Asked Questions

What’s the difference between Type A and Type B?

Type A is intended for compatible equipment using 0-10V or PWM control signals, while Type B is designed for equipment using a resistive control signal.

Which adaptor should I order for an LED grow light?

This depends entirely on the control system used by the light or its driver. Many externally dimmable LED drivers use 0-10V or PWM control, which may require Type A, but you should always check the manufacturer’s specifications before ordering.

Can I use the adaptor with any brand of equipment?

Not automatically. Brand is less important than the control signal and connection requirements of the equipment. The device needs to be compatible with the relevant adaptor and AC Infinity UIS control system.

Does this turn a normal electrical appliance into a UIS device?

No. These adaptors are intended for equipment with a compatible control or dimming interface. For suitable standard mains appliances where you only require automated on/off switching, look at the UIS Control Plug instead.

Why would I add third-party equipment to UIS?

It allows you to bring more compatible equipment into one control system, which can make managing an expanding grow room considerably easier and reduce the need to operate individual devices separately.